
Nắp rửa mắt cho chai 16oz và chai soda
- Downloads
- 4
- Likes
- 1
- Views
- 119
- Remixes
- 0
- Comments
- 0
Files 2 1.2 MB
- eye_wash_cap_16oz_bottle_1770334368.3mf3MF · 548.3 KB
- eye_wash_cap_soda_bottle_1770334368.3mf3MF · 728.9 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #211439
- Category
- Sức Khỏe
- Published
- License
- Creative Commons — Public Domain
Description
Purpose
I am not a medical professional. I designed this to be used by EMTs if they don't have access to typical resources. If you need an eye wash and you're on the go, or as a medic at a demonstration or place where authorities are using chemical irritants. Simply screw onto a bottle, invert, and spray water into the affected person's eye.
Best if used by someone with EMT/Medical training. Make sure the water is not flowing into the other eye, mouth, or nose. You want to remove irritants, not relocate them.
Print Instructions
Print using PETG. It can be watertight, and sanitized using 70% isopropyl alcohol without breaking down. DO NOT print in PLA if you intend to sanitize it using alcohol, it will break down the the surface and could lead to leakage, or worse, spraying microplastics into a person's eye or affected area. I would recommend replacing it after a good amount of use to avoid bacterial growth if you are not sanitizing it with alcohol.
-
Material: PETG - for better safety and sanitation
-
Infill: 100% (make sure it doesn't leak)
-
Layer Height: 0.2mm
-
Number of walls: 3
-
And a dash of love for your neighbors
Happy printing, and F*** ICE
Print spec
- Formats
- 3mf
- Model files
- 2
- Total size
- 1.2 MB
- Largest file
- 728.9 KB












