Cúp in 3D: nhà sản xuất

This is the last in my series for makers to earn achievements for their dedication to 3D printing.  Thank you to everyone who has sent kind words to me.

Model prints with no supports and with 10% infill.  Optional panels are included if you want to print brown/wood covers for the model base.

This trophy is earned when you crack open the box of a 3D printer and print a model for the first time. Whether you have been 3d printing for years, 3d printing for days or have a print that has been going for days, this trophy is for you. You are part of a community with a special talent, to add things to the world that were not there before, you are a maker.

Also in the video is all my test prints and failures.  They are in order of appearance

1. Test Prints for Filament Change (I have failed at this in the past, so I sat down and learned)
2. Failed Voronoi Trophy (I just couldn't get the model right)
3. Test Print for Spaghetti (because failure needs to be tested properly)
4. Bridging test (It would have been embarrassing if I couldn't bridge the gap in my own trophy)
5. Three headless calicats (Testing the GCode modification script that I created for ‘Ran out of filament’ until the retraction settings were just right).
6. Calicat that helped me troubleshoot a nozzle clog that occured in the middle of the project.
7. Test Print for Under Extrusion (patterning holes so they look right)
8. Failed Bridging Trophy (suffered a power loss due to construction work on my street)