
DIY
Vỏ đồng hồ dựa trên MAX7219 matrix và Wemos D1 mini
- Downloads
- 12
- Likes
- 0
- Views
- 72
- Remixes
- 0
- Comments
- 0
Files 4 1.7 MB
- espclock1_1770328104.stlSTL · 879.7 KB
- espclock2_1770328104.stlSTL · 286.4 KB
- espclock3_1770328105.stlSTL · 31.3 KB
- espclock_1770328106.stepSTEP · 506.5 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #210392
- Category
- DIY
- Published
- License
- Creative Commons — Public Domain
Description
The watch case is based on the MAX7219 matrix and Wemos D1 mini. Assembly requires M3 20mm screws and M3 5mm insert nuts. The matrix's output contacts need to be replaced with straight ones. A 5.5mm DC jack or other suitable connector can be used as an alternative power source. This can be connected to the free GND and VCC pins on the MAX7219. I used a double-layer tint film applied to the blister pack as a filter.
Print spec
- Formats
- stepstl
- Model files
- 4
- Total size
- 1.7 MB
- Largest file
- 879.7 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-
New -

-

-

-


