Shroud hút gió hông - Frame 4000D

This shroud allows you to mount 3 fans in the bottom section of the Frame 4000D case. It is helpful both in setups with custom cooling where it will add fresh air into the case so you can exhaust the radiator air outside of the case, but also with air cooled GPU's as fresh air will get blown directly into the GPU instead of recirculated air from the case.

In the front the fan is side mounted to allow for room for pump/res combo's with custom cooling.

Please note that the large portion of the shroud has to be installed first, then the small one. After that the two halves can be screwed together with a countersunk M4x10 bolt.

For the fan mounting, you will need M4x30 or slightly longer screws. The two bottom holes for the side fan mount can utilize standard self tapping screws.

The entire shroud mounts with the three stock screws from the original PSU shroud.