Giá treo Wera Toolcheck Plus cho pegboard 1"

I took DocWeebl's Wera ToolCheck Plus holder, removed the Ikea Skadis mounts, and replaced them with the pegboardy parts of ABurton491's hooks.

2 files provided, one that's a straightup combo of those 2 models and one that also includes a little wera logo on the front.

Even though I used a printer with a super worn hotend, it printed easily in the standard orientation with the bottom on the bottom and plenty of supports for the pegs.

In the future I would give different pegboard pegs a shot, these ones were a bit thin and brittle compared to tohers I've used. BUT, there's 5 sets ofhook/peg pairs so you'll probably be OK if one or two of them break :)