Giá gắn breadboard cho OLED 1.3" kèm encoder EC11 (góc 45°)

If you like what I do here, come visit my (German) Discord or my Facebook group.

Discord: MX-creations

Facebook: 3D printed Grow Tools & Accesories - free .stl

**
This set is designed for breadboard-based prototyping with Arduino and ESP32 systems using a 1.3" OLED display (SH1106 / SSD1306, I²C) with EC11 encoder.**

The main holder mounts the display directly onto a standard breadboard at a fixed 45-degree viewing angle, improving readability during development.
It can be simply plugged onto the breadboard for quick setup or optionally secured with an M3 × 6 mm screw for increased stability.

In addition to the display holder, the set includes a clip that mounts onto the mainboard. This clip compensates for the height difference between the controller board and the display holder and also provides basic cable management to keep wiring organized during prototyping.

The design is intended for electronics testing, UI development, and embedded system prototyping without additional mounting hardware.

Hardware required:

• 4(5)× M3 × 6 mm screw