Hệ Modular Storage System – ngăn kéo có vách chia (REMIX)

I added some dividers to use with @RNeese's excellent Modular Storage System. Note that these are drawers only. You will need the body from the original model. I've uploaded only drawers with the added dividers; if you don't want any dividers (eg. full length) you'll have to get them from the original model.

Drawers with the following configurations are available:

• 1 divider (half, one-third/two-thirds, one-quarter/three-quarters)

• 2 dividers (thirds, one-half/one-quarter/one-half, one-quarter/one-half/one-quarter, one-quarter/one-quarter/one-half)

• 3 dividers (quarters)

• The medium drawer has all of the above variants plus variants with a vertical divider

Recommended Print Settings

• 0.4mm nozzle

• 0.2mm layer height

• 10% infill

• Any filament that isn't flexible

• Print as oriented