Skip to main content
F3D
Hộp Quà Trái Tim Low-Poly – Valentine [Không Cần Support] 1

4 images

DIY

Hộp Quà Trái Tim Low-Poly – Valentine [Không Cần Support]

By Machaki_1134160

Downloads
7
Likes
2
Views
84

Files 1 176.4 KB

  • geo-heart_box_1769820975.stlSTL · 176.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

❤ Not Just Cute, It's Satisfying. A departure from traditional round hearts, this is a Low-Poly Geometric Heart Box. It is designed for a modern aesthetic and a pleasing tactile experience.

✨ Key Features

  • 100% Print-in-Place: No hinge assembly required. Just print and play.

  • Zero Supports: Designed with strictly managed overhang angles. No waste, no cleanup needed.

  • Magnetic Lock: Features hidden slots for magnets. While optional, using them creates a satisfying "click" and keeps the lid securely closed.

  • Gemstone Look: The low-poly facets catch the light beautifully, especially when printed in glossy PETG or Silk PLA.

🧲 Bill of Materials (Magnets) You will need 2 rectangular magnets.

  • Slot Size: Designed for magnets approx. 9 x 4.5 x 2.6 mm.

  • Tip: If the magnets are a bit loose, I recommend using a drop of superglue.

⚙ Print Settings (Tested with PETG) This model is optimized for easy printing. Recommended settings are:

  • Material: PETG (Recommended for durability and shine) or PLA.

  • Supports: NONE. (Seriously, turn them off!)

  • Perimeters (Walls): 2 or 3 loops. (Critical for PETG to prevent the infill pattern from showing through the surface).

  • Infill: 15-20% Gyroid or Grid.

  • Layer Height: 0.2mm recommended.

⚠ Assembly Note (Magnet Polarity) Glue the magnets into the slots after printing. IMPORTANT: Before gluing the second magnet, double-check the polarity! Ensure the magnets attract each other when the lid is closed. If you get this wrong, the box won't close! 🤣

Read more Show less

Print spec

Formats
stl
Model files
1
Total size
176.4 KB
Largest file
176.4 KB

0 comments

See all