RootRigs: DuneDrill — Mini Guardian in được (Dễ dùng Support)

DuneDrill is a low-profile RootRig designed for harsh ground and tight spaces.
Its segmented body, reinforced legs, and drill-style front section give it a distinctly alien look without drifting into humanoid territory.

This model was designed with printability first:

• Solid limbs and body

• No thin wisps or particle effects

• Clean overhangs suitable for tree supports

• Works well as a single-colour print or multi-colour AMS build

Part of the growing RootRigs printable creature series.

---

🧩 What’s included

• RootRigs_DuneDrill.3mf 

---

🖨 Print settings

• Printer: Bambu Lab A1 / A1 Combo

• Material: PLA

• Layer height: 0.16–0.20 mm

• Infill: 10–15% (Gyroid recommended)

• Walls: 3

• Supports: ✅ Tree supports (touching build plate)

• Orientation: As supplied

• Nozzle: 0.4 mm

---

🎨 Colour suggestions (optional)

• Body: matte bronze / sandstone / dark gold

• Dome or front section: translucent amber or clear PLA

• Accents: dark brown, black, or olive

Prints cleanly in a single colour if preferred.

---

📏 Model size

• Designed to scale well between 120–160 mm tall

• Shown at ~150 mm in renders

---

⚠ Notes

• This is a decorative display model

• Not intended as a toy

• Resize freely for your setup

---

❤ Support the project

If you print DuneDrill, please upload a Make — it really helps the RootRigs series grow and lets others see real prints.