Nghệ thuật cóc pixel

Warning:

Use 0.2 mm height for the pixels and the clips.  Infill 10-20%

You have to print every pixel in the "desired" color. For easier printing - they are named accordingly to a color. In addition you can see the "type" of block in the name as well as the number of blocks you have to print from this type and in this color.

E.g.: “Blue x4 (30)”

This transfers to:

• Color: Blue
• Type: 4x connections
• Number: Print 30 pieces of this connector in the color blue.

Use the picture as a reference to find the right position of the blocks.

I recommend printing a bunch more snap fits. If the adhesion is a bit tricky with the snap fit model, use a brim around each piece.

Happy printing and please share your finish print ;)