Valley 1/3 Scale 215TCZ cho Mini STX XT22, v.v.

These are mini Valley motor covers for the ⅓ scale XT22 by Nascarsimracing1. Feel free to save the image of the tag and glue it on the inside of the junction box cover

I printed these with 20% infill and about 80mm/s
Nozzle temp of 255 Celsius and a bed temp of 80 Celsius
I used Inland PETG but you can use just about any brand of filament

Hardware:
Threaded inserts for M3 socket cap screws, here's the pack I bought
https://www.amazon.com/dp/B08BCRZZS3?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
For the 215 Single shaft you'll need 11 inserts
For the 215 Dual shaft you'll need 10 inserts

M3x6 to hold on the junction box and to screw the stator(s) to the covers, and 4 M3x6s to screw the top cap to the main top cover
Use original screws that come with the motor to screw the covers to the Samsung end bells

https://a.co/d/hkATU85
Here is a Amazon link to the capacitor I recommend buying, it perfectly fits in the junction box!

Here's my Marathon Electric model if you want to print this instead

Credit to https://www.printables.com/@Anakinsuitt_3292599 for the photos seen on this page!