Skip to main content
F3D
Orca Nerf Mega XL Launcher (Tùy chọn văng vỏ đạn) 1

12 images

Large file collection Đồ Chơi Ngoài Trời

Orca Nerf Mega XL Launcher (Tùy chọn văng vỏ đạn)

By Ghostmanta_3143708

Downloads
26
Likes
43
Views
448
Remixes
1

Files 45 49.8 MB

  • Orca_UnderBarrelConcept.stlSTL · 5 MB
  • Orca_PistolConcept.stlSTL · 6.3 MB
  • Orca_FullSizeConcept.stlSTL · 7.7 MB
  • Orca_V2StockConcept.stlSTL · 8 MB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

The Orca is a modular, shell ejecting, low hardware nerf blaster that uses 4mm elastic and super glue for assembly. 

Designed to fit the needs of just about any hobbyist or prop blaster enjoyer. Switch from a picatinny underbarrel launcher to a pistol to a full size launcher in seconds with the 3D printed pins. 

The included MS-Shells (Manta Stringer Shells) are front ejecting shells that allow you to switch between other ammo types such as short darts for increased performance or a multi-dart spread. More ammo types and non-ejecting barrel inserts coming soon!

Update 1/20/26: Pump grip variants without the string guide have been added.

Printing Info

All models are oriented how I printed them but you may have better luck with a different orientation. If your printer is well tuned, you should be able to print most parts without support. 

  • Infill: 25% Gyroid

  • Walls: 6

  • Nozzle: .4mm

  • Layer Height: .15mm

  • Support: No (Highly recommended for Picatinny_PumpGrip) 

  • Bed Adhesion: 5mm Brim (Recommended for bed slingers)

Pins can be scale adjusted in your slicer if they are too tight or too loose. 

Included in the files are pre-grouped models split by color for easier slicing. Primary (White) Secondary (Black) Tertiary (Orange). 

MS-Shell Loading Procedure

First, load the shell with your desired ammo. Leaving the blaster unprimed, slide the shell into the front of the launcher body. The cutout in the back of the shell should line up with the string. Prime the blaster, insuring the shell follows the string all the way back. If done properly, the cutout should line up with the string path. Lastly, push the shell in with your finger to lock it in place. The energy of the elastic should eject the shell after firing. 

*MS-shells are still experimental meaning they have only been printed and tested with my filament and printers. Your results may vary but I will continue to work with the community to iron out any issues. Unworn ember or ruby darts recommended for best results.*

Filament

*Strength and function untested with other types of filament such as basic PLA or PETG*

Other Accessories 

Ways to Support Future Uploads

Read more Show less

Print spec

Formats
stl
Model files
45
Total size
49.8 MB
Largest file
8 MB

0 comments

See all