Nắp che bụi cho William Optics UniGuide 32 (Dust Cap)

This is a replacement dust cap designed specifically for the William Optics UniGuide 32mm Guide Scope. Whether you've lost your original cap or just want a spare to keep your optics protected from dust and scratches during transport, this print provides a snug and secure fit.

It is designed to fit the front objective of the 32mm UniGuide slide-base guide scope commonly used with the RedCat 51 and other refractors.

Printing Recommendations

• Material: TPU (95A) is highly recommended for this print. The flexibility allows for a tight friction fit that won't scratch the scope body and won't fall off in your gear bag.

• Alternative Material: If printing in PLA or PETG, you may need to scale the model slightly (±1%) depending on your printer's tolerance to ensure a good fit, as these materials are rigid.

• Layer Height: 0.2mm standard or 0.16mm for a smoother finish.

• Infill: 15-20% (or 100% if you want it completely opaque to block light).

• Supports: No supports required if printed flat face down.

Compatibility

• William Optics UniGuide 32mm Slide-Base Guide Scope