Breaking Bad - Jessi Pinkman Hueforge

breaking bad - jessi pinkman hueforge

3D Print Instructions

---------------------

Layer height: 0.020 mm

First layer height: 0.200 mm

Recommended: Layer loops: 1; Infill: 100%

Start with color: #1e6469

Color swap plan:

1. Start with #1e6469

2. Swap to #5c7468 at layer 1 (~0.200 mm)

3. Swap to #043c42 at layer 7 (~0.320 mm)

4. Swap to #3d8c8e at layer 17 (~0.520 mm)

5. Swap to #6ab3b1 at layer 18 (~0.540 mm)

6. Swap to #f8ad3d at layer 19 (~0.560 mm)

7. Swap to #b6dbdb at layer 21 (~0.580 mm)

Notes: Heights are approximate. Confirm in slicer before printing.

---------------------

Made byrezzad