Hueforge Insert cho Iron Lung Popcorn Bucket

I currently have the popcorn bucket printing right now, while I was at work I thought of some ideas for hueforge's to print. This first one is just a drop in, some glue to keep it in place. I will be working on other images to add and fix any other issues that arise. 

This image is of Markiplier from the Iron Lung Poster. I recommend warming the bottom side of the hue forge to "shape" it to the bottom of the bucket before any form of permanent fixture like glue. Look out for the other uploads and modifications coming soon!

Based off your slicer settings the layer height may not match the pictures below, which is why I also included the height at which the color changes to the right of the images. These are scaled to the creature bucket at 90% !You may need to adjust to your own bucket depending on time of download if the original model has been fixed to V2. No AMS needed, Manual filament swaps possible. Pictures also show the difference in detail captured between .4 nozzle and .2 nozzle.

________________________________________________________________________________________________________________________________

Layer Changes (Layer height/mm height)

Base Layer .16, Layer Height .08 for .4mm nozzle.

________________________________________________________________________________________________________________________________

Layer Changes for (Layer height/mm height) 

Base layer .16, Layer Height .04 for .2mm Nozzle.

________________________________________________________________________________________________________________________________

Filaments:

1. PLA PolyLite Black Transmission Distance 0.3 

2. PLA BambuLab Basic Blue Grey Transmission Distance 3.

3. PLA PolyLite Grey Transmission Distance 1.

4. PLA PolyLite White Transmission Distance 5.