Hũ đựng tro cốt thú cưng (Pet Cremation Urn)

If you enjoy this design, please consider buying me a coffee: https://buymeacoffee.com/leehound

This is a cremation urn sized for a pet.  With a Funnel for easy transition of the remains.

Some info about urns. It takes 1 cubic inch of volume for every pound. This urn has a volume of 50 cubic inches, which can hold a subject that weighed 50 pounds (22.7 kilograms).

I have given choices for design elements:

Four - Vessels

Two - Lids

Five - Bases

Printing:

.2 mm and 3 perimeters.

Structural  - print setting if using PrusaSlicer

Urn Vessel: I print with a Brim.  Probably fine without it, but why take the chance. And it cleans off easily.

Lid: Print in orientation provided

Base: All will easily print without supports (except "Pet Urn Base-Open") Important, for best quality paint your seams on the inside of arms and legs (see picture)

Design Choices:

A matte finish on the vessel looks best.

Try doing a Fuzzy Skin on the Heart Face, a really nice effect

On the lid try Octagram Spiral for the Bottom Fill Pattern

I have not tried any scaling. I don't think it will scale smaller because of the threads. But some scaling larger should be fine.

And last but not least try: Prusament PLA Blend Viva La Bronze. What a great effect this material had on this project.

Enjoy!