
Marvel United - Hộp lưu trữ Card Board Location
- Downloads
- 22
- Likes
- 3
- Views
- 202
- Remixes
- 1
- Comments
- 0
Files 8 4.7 MB
- MU_S1andS2_Locations_Top_v0_1769313529.stlSTL · 22.3 KB
- MU_S1and2_Locations_Bottom_v1_1769313530.stlSTL · 2.1 MB
- MU_Villains_Dashboards_Top_v1_1769313531.stlSTL · 41.3 KB
- MU_Villains_Dashboards_Bottom_v1_1769313532.stlSTL · 158.1 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #202812
- Category
- Board Game
- Published
Description
Marvel United - Card Board Location Storage
Notes:
- No Supports Needed.
- These are not Print in Place Hinges. Use a short piece of filament as the hinge pin. I used a lighter to melt/mash the end of the filament to keep it in place Everything was Printed at .2 Layer Height. I used a brim on most of my prints.
There are 4 Boxes in Total. Seasons 1&2 were designed together while Season 3 Came Later.
If you have any questions please do not hesitate to ask. I am always happy to help.
Marvel united Seasons 1 &2 Locations:
1x MU_S1andS2_Locations_Top_v0
1x MU_S1and2_Locations_Bottom_v1
Marvel United Seasons 1 & 2 Villains Dashboards:
1x MU_Villains_Dashboards_Top_v1
1x MU_Villains_Dashboards_Bottom_v1
Marvel United Season 3 (Multiverse) Locations:
1x MU_Multiverse_Locations_Top_v0
1x MU_Multiverse_Locations_Bottom_v0
Marvel United Season 3 (Multiverse) Villains Dashboards:
1x MU_Multiverse_Villains_Top_v0
1x MU_Multiverse_Villains_Bottom_v0
I designed this to be storable both flat on the bottom and sideways in a Kallax.
Noted Instructions:
All were Printed at .2mm Layer Height. 15% Cubic Infill 5 Top and 3 Bottom Layers
Print spec
- Formats
- stl
- Model files
- 8
- Total size
- 4.7 MB
- Largest file
- 2.1 MB













