Bộ kit tấm Skadis modular (Skadis panels modular kit)

Skadis pegboard modular kit

My daughter wanted a Skadis pegboard like this for Christmas. So I assembled it and hung it on the wall. It looks great with the accessories!

Then I thought of doing something similar so that the individual parts could be assembled. I struggled with the connectors for a long time, but after multiple tests I was satisfied. The boards are lightened to half the thickness, the rest is filled by the protruding hole for accessories. The parts are marked, you can assemble different combinations - 1x3,  2x2,  2x3,  3x3 boards. Just use the right parts. The part markings are in the picture.

Before printing the entire board, try printing a test joint - STL is in the Test folder. I made the connectors without tolerances so that the joint holds firmly, so they are quite difficult to install - so try Test

Included are parts for the Wall mount - for a 4mm screw and a Spacer

Wall mount

Spacer

Test 

You can find accessories for the Skadis pegboard here:

https://www.printables.com/@ThorinOakenshield/collections/3093879