Dungeon Blocks Grid Slotlock (Tùy chỉnh kích thước & vị trí)

I love the dungeon blocks system! However I have several pains with it:

1. You can't use smaller than a 3x3 grid

2. To get bigger grids that tile properly, you need to go up in multiples of the 3x3

3. You have to adjust the location of the grid in multiples of the 3x3 grid

Inspired by their interlocking grid, I made the Slotlock system. This system solves all of these problems! You can now make grids of any size and shape that utilise a 1x1 tile! The grids are easy to slide together, separate, and even lock nicely so you won't knock the scene apart.

Using my settings it uses 17.19g of filament and costs $0.29 AUD ($0.19 USD) per 3x3 grid tile! This assumes you buy Bambu Basic PLA in bulk ($17.04 AUD a roll, $11.39 USD)

I hope you enjoy!

Print Settings

• Printer brand:

  Bambu Lab

• Printer:

  A1 Mini

• Rafts:

  No

• Supports:

  No

• Resolution:

  0.2

• Infill:

  3%

• Filament material:

  PLA

• Filament brand:

  Bambu Lab

• Filament color:

  Basic Black

• Notes:

  Wall loops: 1 (This is plenty strong for this purpose, you can do 2 to make it stronger but it costs an extra 75% in filament)

  These settings are because Bambu Studio has a weird bug where I can't make the bridge angle 45° so these settings make it happen, you can skip these if your slicer works properly
  Sparse infill density: 3%
  Fill multiline: 3
  Sparse infill pattern: Lightning