Hộp Đựng Xúc Xắc Tham Số (Parametric Dice Box)

This is a remix of the Parametric Dice Box from Aaron.

I've remade the Fusion file for complete parametric configuration. I've had problems with the original because some change may do some weird things to happen.

Due to many change, the parameter in Fusion are now the following :

Parameters

DiceSie

The size of the dice. Do not forget to put some clearance for them.

Spacer

The thickness of the wall between dice. You should be able to set this to zero to get a box without dividers.

Row

The quantity of dice row.

Column

The quantity of dice column.

WallThickness

This drives the minimum wall, floor, and top thickness. It also makes sure there is enough meat in the hinge.

BoxSizeColumn

DO NOT EDIT Size of the box depending of Row.

BoxSizeRow

DO NOT EDIT Size of the box depending of Column.

MagnetDiameter

The diameter of the magnets.

MagnetHeight

The heigh of the magnets. It must be no bigger than ½ the die variable.

HingePinDiameter

The hinge pin diameter. Default is for a bit of printer filament, 1.75mm.

HingePinClearance

The hinge pin clearance (Must be smaller than HingePinDiameter).

I've put the files for 48x 12mm dice box and 100x 16mm dice box. Both with 5mmx2mm magnet and 1,75mm hinge.