Skip to main content
F3D
Hộp đựng CPU LTT (LTT CPU Cases) 1

1 image

DIY

Hộp đựng CPU LTT (LTT CPU Cases)

By LinusTechTips

Downloads
2,231
Likes
496
Views
22,651
Remixes
5

Files 10 1.2 MB

  • 115x_1200_holder_v8_1768172978.stepSTEP · 126.4 KB
  • 115x_1200_holder_v8_1768172979.stlSTL · 134.9 KB
  • 17xx_1851_cpu_holder_v11_1768172979.stepSTEP · 126.1 KB
  • 17xx_1851_cpu_holder_v11_1768172980.stlSTL · 114.1 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 5

See all 5 remixes

Description

They are finally here,  CPU cases for your organization needs!

Versions Included:

  • 17XX 1851 Holder V11
  • 20XX Holder V5
  • 115X 1200 holder V8
  • AM4 Holder V11
  • AM5 Holder V8

Tools required:

  • Hammer

Extra Materials:

  • 2 x 2D finishing nail 1" (25mm), or other ~1.75mm Rod

Printing:

  • Orientation: Flat sides on the bed
  • Works well in PLA and PETg.
  • normally use: 0.2mm, 0.25mm or 0.28mm layer height

Assembly:

  • Place the upper case so that it nests into the lower case
  • the hinge holes should be aligned
  • Insert nail/rod (point bit first) into hole
  • Tap in nail/rod with hammer till nail is seated
  • trim excess if desired

Repeat till all you cases are assembled, then happy organizing!

.STEP and .STL files are provided.

Change Log:

  • 170xx 1851 CPU: Increased clearance for LGA 1851 CPUs

Read more Show less

Print spec

Formats
stepstl
Model files
10
Total size
1.2 MB
Largest file
139.9 KB

0 comments

See all