Tay mở cửa khẩn cấp phía sau cho Cybertruck

The mechanical emergency door release on the cybertruck is hidden under a rubber insert in the door pocket.  This makes it very unlikely to be found should an accident render the electronics unresponsive which could be deadly.

This model replaces the rubber insert with a clearly labeled pull handle.

The only difference between the base_left and base_right is the text is flipped so it will read properly after mirroring about the X axis.

To print the driver side:

1. print the base_left.  If you have a multi-color printer, add base_text_left and assign the desired extruder/color

2. print the pull_left. If you have a multi-color printer, add pull_arrow_left and assign the desired extruder/color

To print the passenger side:

1. print the base_right.  If you have a multi-color printer, add base_text_right and assign the desired extruder/color. Then mirror before compiling gcode

2. print the pull_left. If you have a multi-color printer, add pull_arrow_left and assign the desired extruder/color. Then mirror before compiling gcode

Make sure your pull is printed with something strong like PETG or PCTG with at least 30% triangular infill.  I also recommend setting perimeters to 3.

There is an accommodation in the pull for a square nut and a M3X25 hex bolt to help strengthen it across the layer lines.

[Update: uploaded STEP files on request to facilitate better remix]