Skip to main content
F3D
#0206 [REMIX] Nắp che góc dưới trước BLANK… 1

2 images

Máy In 3D

#0206 [REMIX] Nắp che góc dưới trước BLANK (Front Bottom Corner)

Remix of #0152 Nắp che góc dưới trước cho lối đi dây (Front Bottom Corner Cable Passthrough Cover) By BuildX

By BuildX

Views
28

Files 1 20.6 KB

  • Front Corner Bottom Panel BLANK Plug.stlSTL · 20.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

*** Thanks for checking out this model! ***

If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like!  

**********

Per a request from a user, this is a variant of the #0152 Front Bottom Cable Passthrough Cover, but this is BLANK - to cover the hole without any cables.

This opening is another source of hot air leakage - it's as big as a 20.5mm hole! Covering it (and others) up is part of a bigger project of mine to plug up ALL the sources of air leakage so the enclosure can heat up faster and max out at a higher temperature even without active enclosure heating.  

Features:

  1. Simple one part cover that snaps in place.

  2. Installed from the inside so you don't have to disconnect anything to install it.

  3. Prints quickly and without supports.

Note: Do you want one that is "blank" that blocks anything from passing through?  It's here:

Recommendations:

  1. Use PETG/ABS/ASA.  Tested with Polymaker ABS Black.

  2. PLA is not suitable for the function of this model - it's not great at resisting higher temperatures and will take a set over time and start loosening up.

  3. 0.2mm layer and 0.4mm nozzle works fine.

  4. Use textured Prusa print plate to match the texture of the enclosure.

Installation:

  1. First, insert and align the catches on the side with 2 catches.

  2. Push down on the opposing corner (with one snap - firmly - to snap it in.

  3. That's it, you're done!

For best results with heat retention, I suggest you download and print my other designs as well:

  1. Extra Rivet Plugs: https://www.printables.com/model/537013-xrivets-for-prusa-enclosure-extra-rivets-plugs

  2. Corner Caps: https://www.printables.com/model/552596-original-prusa-enclosure-corner-caps-from-the-insi

  3. Slit Covers: https://www.printables.com/model/537014-prusa-enclosure-slit-cover-plug

  4. Hex Vent Hole Cover: https://www.printables.com/model/809977-hex-vent-hole-cover-original-prusa-enclosure-ope

  5. LCD Cable Exit Cover: https://www.printables.com/model/809972-lcd-cable-exit-cover-original-prusa-enclosure-ope

  6. LCD Cable Exit Cover with Accessory Cable Pass-through: https://www.printables.com/model/786143-lcd-cable-exit-cover-with-accessory-cable-pass-th

  7. Front Bottom Cover: https://www.printables.com/model/1096783-0190-front-bottom-cover-original-prusa-enclosure

  8. PSU Cable Pass-thru Cover: https://www.printables.com/model/809966-psu-cable-pass-thru-cover-original-prusa-enclosure

  9. PSU Pass-through Cover (Blank): https://www.printables.com/model/859757-psu-cable-pass-thru-cover-blank-original-prusa-enc

  10. Cable Inlet Cover:  https://www.printables.com/model/809962-cable-inlet-cover-up-to-4-cables-original-prusa-en

  11. “Mystery Hole” Cover: https://www.printables.com/model/859763-mystery-hole-cover-for-original-prusa-enclosure

  12. Rear Bottom Corner Cable Pass-through Cover: https://www.printables.com/model/859759-rear-bottom-corner-cable-passthrough-cover

  13. Threaded Bottom Panel Hole Cover: https://www.printables.com/model/873425-miscellaneous-bottom-panel-hole-plug-original-prus

  14. Front Bottom Cable Passthrough Cover: https://www.printables.com/model/859761-0152-front-bottom-corner-cable-passthrough-cover

  15. I will be releasing an Automatic Enclosure Heater as well…check back soon!

**********

If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D

Happy Printing!

P.S. Please post some constructive feedback if you'd like to see something improved.

Read more Show less

Print spec

Formats
stl
Model files
1
Total size
20.6 KB
Largest file
20.6 KB

0 comments

See all