Skip to main content
F3D
Rasher Animal Crossing – Mô hình in 3D & sơn acrylic 1

2 images

Mỹ Thuật

Rasher Animal Crossing – Mô hình in 3D & sơn acrylic

By MaxSiebenschlafer

Views
63

Files 4 68.3 MB

  • pig_1768003392.stlSTL · 53 MB
  • pigWithHole_1768003396.3mf3MF · 14.8 MB
  • FigurenBase_1768003398.3mf3MF · 535 KB
  • AnanasSchablone_1768003399.3mf3MF · 73.8 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Rasher (DE: Ede) is a neighbour from the game Animal crossing which I modeled, printed and painted. Rasher is a pig with a grumpy personality. I used the version of his house from New Horizons.  

Painting and Assembly:

I used a good light source to see the correct color.  I used acrylic paint for all the painting.

The most important tool I used is the wet plate, I build out a wash cloth and baking paper.

This is the final color I used to paint Rasher.

I began the process with the main color. 

I always checked for the color reference on the wiki page. 

For the fine details of the pineapple, I 3D printed a template and tested it on a different model. After some tries, I had a working process. So try to train a little bit before starting.

I modeled a special baseplate with a diameter of 70mm that should display the house of Rasher with the iconic manhole cover from the game. I also add the floor parking marks. Furthermore, I added some cracks to the concrete to show the old and broken down building Rasher is living in. 

For the tail, I used a thin electrical wire. This cable got wrapped around a M3 screw and fixed for 24h.  I pre-painted the tail with a longer length and cut it to the appropriate size.

I used a hot glue gun to fix the tail to the model and painted over the hot glue and the tail.

The final figure was fixed inside a glass bottle with an opening diameter of 70mm. The base can be mounted inside without any added materials. I used this model as a lid.

The final model looked really nice and had quite some color to it. I really enjoyed building and painting it. For all the process, I think the wet plate and some good paint brushes are the most important tools.

I hope you enjoy the design and find it useful!

Read more Show less

Print spec

Formats
3mfstl
Model files
4
Total size
68.3 MB
Largest file
53 MB

0 comments

See all