Giá gắn Wall Control / Pegboard cho Ring Indoor Cam

Simple mount for solidly mounting a ring indoor cam onto Wall Control or standard 1" Pegboard using well nuts.  There is a small recess for the well nuts such that the holder will be perfectly flush against the panels.

Designed for use with these well nuts: https://www.amazon.com/gp/product/B08LCRBS4S
Stock of these is kind of in and out and if you're interested definitely contact https://worthytools.com/ to express your interest.

Use #6-32*1-1/8"L bolts.  You can potentially use longer bolts if you have your pegboard installed further away from the wall behind it.
https://www.ebay.com/itm/154145272749

Well Nuts Update 12/31/2025

I have finally located a suitable supplier for mounting these to Wall Control and will sell them here:
https://www.ebay.com/itm/147064927166
Note that these will not grip properly onto standard wood Pegboard.  The brass threaded insert is a bit too thick and doesn't allow for gripping onto thicker panels, but they are perfect for thin sheet metal such as Wall Control.  For Pegboard you can potentially use the 1" or so long well nuts from McMaster, but this will then require that you have your Pegboard some distance away from the wall so you're not screwing into it.