Giá giữ hex bit cho tua vít máy gắn pegboard Wall Control

Holder that I use to mount some commonly used power screwdriver bits (standard 1/4" hex shank) on Wall Control pegboard using well nuts. There is a small recess for the well nuts such that the holder will be perfectly flush against the panels.

This should in theory work for any 0.25" pattern pegboard as well. Well nuts are overkill since you don't really need that much strength, but I just like my holders to be nice and tight up against the panels.

Well Nuts: https://www.amazon.com/gp/product/B08LCRBS4S/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Use #6-32 x 1"L bolts for mounting:
https://www.ebay.com/itm/154145272749

Bit Sets Pictured:
https://www.amazon.com/gp/product/B08598L78W
https://www.amazon.com/gp/product/B085986848

Well Nuts Update 12/31/2025
I have finally located a suitable supplier for mounting these to Wall Control and will sell them here:
https://www.ebay.com/itm/147064927166
Note that these will not grip properly onto standard wood Pegboard.  The brass threaded insert is a bit too thick and doesn't allow for gripping onto thicker panels, but they are perfect for thin sheet metal such as Wall Control.  For Pegboard you can potentially use the 1" or so long well nuts from McMaster, but this will then require that you have your Pegboard some distance away from the wall so you're not screwing into it.