Khay công cụ cho các phím Allen

As almost all Allen keys are different in length of both arms, bending radius (and even angle), it is impossible to use the same tray for two different sets of keys.

That was the reason for me to write an open scad script for this purpose. It can be parametrized and used on it's own or combined e.g. with a gridfinity box (as provided by gridfinity-rebuilt-in-openscad )

Main features:

• Allen Keys are customizable via parameters
  • key diameter (face to face, not edge to edge)
  • lengh of longer arm
  • length of shorter arm
  • Angle radius of Allen key
  • compensation if elbow angle is not 90° (default 0)
• Magnets can be placed in cavities to hold the Allen key in place
• The magnets can be removed easily