Vịt Dễ Thương Thư Giãn – Không cần AMS! Snap-fit!

This Cute Relaxing Duck is a simple but expressive model made to look calm, cozy, and friendly. The design focuses on smooth shapes and clean details, making it both fun to print and great to display.

The model is provided in multiple files so it can be printed with or without an AMS. Please read the print instructions carefully—especially if you are printing without AMS—to ensure a good result.

Size: Model is about 70mm long (2,5 Inches) - do not resize because of snap-fit design.

Print Instructions

With AMS

• If you have an AMS, simply use the provided AMS 3MF file.

• Load your filaments, slice, and print — no extra steps needed.

Without AMS (No AMS needed!)

Two separate prints are required:

1) White body

• I strongly recommend using the settings from the shared 3MF file.

• Especially important:

  • Nozzle: 0.4 mm

  • Layer height: 0.2 mm

  • Supports: Yes (25°)

  • Brim: Not needed for me, but this depends on your filament’s bed adhesion

2) Yellow parts

• I strongly recommend using exactly (!) the settings from the shared 3MF file.

• The following are critical:

  • Orientation

  • Layer height

  • Rafts

  • Supports

• These parts are small and delicate—changing settings may cause print failures.

After printing

• Snap the parts into place with a little force.

• Do not mix up the feet :-)

---

Feedback

Please leave a comment and let me know how well it printed for you. Your feedback really helps me adjust and improve the model and print settings. 😊