Skip to main content
F3D
UAP v6 CHC XL / Goliath ECAS – Toolhead UAP cho Monolith… 1

2 images

Máy In 3D

UAP v6 CHC XL / Goliath ECAS – Toolhead UAP cho Monolith (ECAS)

Remix of UAP V6 By Smolboi

By VoronModder_1097375

Downloads
3
Likes
3
Views
96

Files 6 92.7 MB

  • UAP_Goliath_CHC_XL_ECAS_Duct_1767897934.stlSTL · 15.9 MB
  • UAP_V6_Goliath_CHC_XL_ECAS_Wire_Guide_X_Switch_1767897936.stlSTL · 1.6 MB
  • UAP_Goliath_CHC_XL_ECAS_Duct_Carriage_Plate_EZ_Print_1767897937.stlSTL · 1.6 MB
  • UAP-Goliath-Beacon_v2_1767897938.stlSTL · 2 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#196514
Category
Máy In 3D
Published

Description

Smolboi's UAP Toolhead for Monolith with ECAS! This version is specific to Goliath / CHC_XL Hotends, with the CHC XL you will have to remove the MZE for this to work correctly otherwise the hotend tip is too far from the Beacon / Cartographer probe.

This toolhead is designed for running toolhead wires to the MCU.... !!! NOT FOR USE WITH TOOLHEAD BOARDS !!!

Additional info: make sure you have the correct drive gear, you want the clockwork 2 version as sherpa will not fit correctly, there are some that will however, that is up to you to find and source. Image attached to show the correct DIA of the drive gear base, its 8mm.

Whats Different?

1. 2510 Fan mount uses 4x M3 Heatserts and EZ print breakaway supports
2. Carriage Plate also has print in place breakaway supports
3. Everything orientated correctly

**Printing Tips:

1. Use Supports! Tree Supports work best. (FOR DUCT)**

2. 100% infill - Why? because CAD assumes the parts are solid, COM is found this way, therefore 100% infill.

Licensing maintained from Smolboi's printables page.

Read more Show less

Print spec

Formats
stepstl
Model files
6
Total size
92.7 MB
Largest file
70 MB

0 comments

See all