Hộp Honeycomb kèm Nắp Snap-On

This honeycomb box is both simple and attractive, equipped with a snap-on lid. If you encounter any issues, leave a comment, and I will resolve them promptly. Remember, if you print box V,1, it will take a little bit less time, but it will string V2, as it has no stringing.

 **Notes: ** 1. If you’ve printed a box with a tight lid, sand the edges lightly for an optimal fit. Avoid over-sanding, as this can lead to a loose fit. Using a harder filament will enhance durability, but if needed, you can easily print a new lid.

 2. If you are working with soft filament, limit the number of times you open and close the box to prevent wear. 

Very fun texture!

** Important Note: ** 

To resize the box, import both the lid and the box. Select both by holding the Shift or Ctrl key to choose multiple items. Once selected, use the scale tool to adjust their size as desired. 

If you like the model, consider giving a tip to support Fonn Prints and help us with future models and more! 

The dimensions for the boxes and lids are as follows:

 For Box V1 and V2XZ: 

- Length: approximately 39.7 mm

 - Width: approximately 25.8 mm 

- Height: approximately 25 mm

 For the Easy Open Lid:

 - Length: approximately 40.2 mm

 - Width: approximately 26.12 mm

 - Height: approximately 7 mm

 For the Tight/Water-Tight Lid

- Length: approximately 39.8 mm 

- Width: approximately 25.8 mm 

- Height: approximately 7 mm.