Kẹp dẫn hướng ống PTFE cho P2S

Many P2S users, including me, have the problem that their PTFE tube, going away from the toolhead, is scraping on the glass lid. To solve this issue I made a clip that you can attach to the cable chain next to the ptfe tube. This helps to guide away your tube from the top glass panel, but be sure that the cables can move correct with the toolhead. I used small cable ties to fix the clips on the correct position.

Printing it with ABS or ASA is recommended since PLA doesnt have a good heat resistance and will deform if you print with a high camber temperature.

I would appreciate it if you like this and follow me as a sign that you find my work helpful. Thanks.