Decora Wallplate Blank Insert (Miếng che lỗ trống Decora)

This is a blank Decora wallplate insert, to cover an empty hole after you remove a device like a switch or plug.

Design notes:

• The depth of the front part of the insert should bring it into near-flush alignment with your faceplate. I've tested it with Lutron Claro and Legrand hidden-screw plates.
• The top and bottom holes are threaded for a 6-32 machine screw.

Printing tips:

• Print as-oriented in the .stl file, the larger part down.

Other notes:

• If you'd like any adjustments (e.g., thickness of the front or back parts, etc.), just message me. I used OpenSCAD to design it, and it's fully parameterized for easy changes.