
Thiết kế bản lề print-in-place để in 3D
- Downloads
- 223
- Likes
- 25
- Views
- 1,133
- Remixes
- 1
- Comments
- 0
Files 4 82.4 KB
- hinge_large_H_1767669638.stlSTL · 20.6 KB
- hinge_small_V_1767669639.stlSTL · 20.6 KB
- hinge_large_V_1767669640.stlSTL · 20.6 KB
- hinge_small_H_1767669640.stlSTL · 20.6 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #194487
- Category
- DIY
- Published
- License
- Creative Commons — Attribution
- Tags
Description
simple print-in-place hinge to add to other designs
It's so simple to print even I could do it, please post makes! :)
Print Settings
Printer:
Sovol SV01
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
Gyroid 15% (full size), 20% (half size H), 100% (half size V)
Filament:
Sovol PLA
White
Notes:
Tested both at full (20 mm wide) and half size.
Both vertical and horizontal print tests successful.
Sliced with Cura. For the vertical half size I chose an initial layer horizontal expansion of -0.1 mm because my printer over-extrudes slightly causing elephant foot. Chose Gyroid in-fill for better strength.
Original Tinkercad objects:
- https://www.tinkercad.com/things/91tPl9TJ99S
- https://www.tinkercad.com/things/k1ulUTLYmKK
- https://www.tinkercad.com/things/2T87KM6BfLD
- https://www.tinkercad.com/things/0HOML1g1788
Category: 3D Printing
Print spec
- Formats
- stl
- Model files
- 4
- Total size
- 82.4 KB
- Largest file
- 20.6 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-
New -

-

-

-



