Diều hâu đuôi đỏ (Red Tail Hawk) - Hueforge

Red Tail Hawk - Hueforge

Sized so you can print the frame on a standard sized printer. See frame recommendation below.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 176x220mm in size

Filaments Used:
PLA PolyTerra Charcoal Black  Transmission Distance: 0.3
PLA PolyLite Dark Grey  Transmission Distance: 1
PLA PolyLite Steel Grey  Transmission Distance: 1
PLA PolyLite Grey  Transmission Distance: 1
PLA PolyLite White  Transmission Distance: 5
This print uses 5 unique filaments

Swap Instructions:
Start with PolyTerra Charcoal Black
At layer #7 (0.64mm) swap to PolyLite Dark Grey
At layer #12 (1.04mm) swap to PolyLite Steel Grey
At layer #17 (1.44mm) swap to PolyLite Grey
At layer #21 (1.76mm) swap to PolyLite White for the rest.

I recommend this frame: https://www.printables.com/model/518556-parametric-frame-for-hueforge-filament-paintings

It's a great design and you can set it for any size hueforge print you want. You can use the free version of Fusion360 to create new sizes easily, don't be afraid to try it out even if you've never used Fusion360 before.

Enjoy!