Skip to main content
F3D
Crash Derby Transformer: Škoda Fun → Josef Průša 1

8 images

Board Game

Crash Derby Transformer: Škoda Fun → Josef Průša

Remix of Nâng Cấp Xe Van Đấu Va Chạm By Prusa3D

By Rossero

Downloads
8
Likes
10
Views
192
Download 2 packages· 11 files · 381 MB· 381 MB

Files 11 381 MB

  • Felicia_Fun_Transformer_1767666589.stlSTL · 5.8 MB
  • Felicia_Fun_colored_Prusa_1767666590.3mf3MF · 47.4 MB
  • Felicia_Fun_colored_1767666593.3mf3MF · 44.6 MB
  • Felicia_Fun_Yellow_parts_Prusa_1767666596.stlSTL · 66.2 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

When I saw the Crash Derby game I really really wanted to create a transformer! Maybe impossible at this scale but I like a challenge :)

But what car to choose? American muscle and pick-ups clearly fit a crash derby but I personally really prefer smaller and quirkier cars. So when I discovered the 1997 Škoda Felicia Fun, a Czech classic, there was no turning back!!

As predicted it was a very very big challenge to make it printable at the minuscule scale and with a standard 0.4mm nozzle, but it works! At first I tried to print all components separate and click them together because I was struggling to find room for reliable print in place axles but after some experimentation the click together parts weren't reliable at this scale so I had to integrate the axles (which worked perfectly in the end).

Finally I created a second version with the transformer face replaced with a miniature remix of a Josef Průša model, completing the Czech classic combo!

The model prints in multiple parts and the axles need a drop of glue. You can either print the parts in single colors or print the multi color version if you have a MMU or equivalent. (You can also color in the windows with a sharpie) I printed at a 0.12mm layer height and I only used a small brim for the front axle/wheels.

I found it works best to snap the rear axle in place first and then glue everything together upside down so you can align the axles/wheels using the base (see image). Make sure to dry-fit the axles first since there is a 0mm tolerance (press fit), but at this scale it ranges from loose to needing post processing depending on printer and settings.

I really hope you like the model!

Other than that, have fun with the model!

Happy printing and gaming!
- Rossero

Read more Show less

Print spec

Formats
3mfstl
Model files
11
Total size
381 MB
Largest file
66.2 MB

0 comments

See all