Khay/Holder Hex Bit đơn giản 60 lỗ (kèm OpenSCAD Generator)

I needed a way to organize a bunch of hex bits and wanted a very simple tray; this is what I came up with. A tray with 60 holes, six rows and ten columns, of 8mm diameter holes, 13mm deep, with 1mm walls.

This works well for holding a bunch of various bits that I had. This is much easier than storing them in a zip-top bag or small bin.

In the OpenSCAD file, adjust numRows and numColumns to generate a different size holder. You can also adjust diameterHole and heightCompartment if you wish to change the size of the holes, but I've found these sizes work well for loosely holding them, which is what I wanted.

The one shown here was printed in basic black PLA and used the Arachne wall generator (in Bambu Studio / OrcaSlicer). All print settings were at defaults. (And yes, I know the filament was damp. I was using up the remains of a roll and for this object didn't care to dry it out first.)