Giá đỡ chai nước cho giường trẻ em

My kids just can't go to bed without a small water bottle in can they will be thirsty in the middle of the night, until recently the bottles were place on the floor near the bed - but we just got them a bunk bed and placing the bottle on the floor is no longer an option

This model (unlike any of my previous models) is optimized for a 1mm nozzle because it seems like a good model to test my new 1mm nozzle with but it should print just fine with any smaller nozzle size.

The part that sits on the bed rail is intentionally to big because I wanted to add some soft material in there (I used cardboard from an old box) to give it a tight fit and protect the bed's wood from the printed part finish.

I printed this in PLA with 5% infill, 1mm shells, no support.

The STL I uploaded is for a be frame that is approximately 3cm wide, you can make a copy of this and change the size in OnShape using this link: https://cad.onshape.com/documents/cfc7c98bfc25c656f59fac89/w/6ce60dddc0b06477bff00778/e/3d8676af667f5b1969c72073

Variable W is the width of the bed frame boards, variable B is the diameter of the bottle hole.

Designed with OnShape, sliced with Cura and printed on a Robo 3D R1+

Category: Organization