Skip to main content
F3D
Ốp toolhead SE3D Elegoo Centauri Carbon nhẹ hóa + ký hiệu ∞… 1

1 image

Máy In 3D

Ốp toolhead SE3D Elegoo Centauri Carbon nhẹ hóa + ký hiệu ∞ - lỗ/slot vent

Remix of Chụp đầu in SE3D Carbon Elegoo Centauri By Syn3D_3309286

By iduckett_2886021

Downloads
409
Likes
103
Views
3,270

Files 8 16 MB

  • toolhead-cover-front_oo_light_hole_vents_1767624884.stlSTL · 4.9 MB
  • toolhead-cover-front_oo_light_slotted_vents_1767624886.stlSTL · 4.7 MB
  • toolhead-cover-front_oo_light_1767624887.stepSTEP · 1.1 MB
  • toolhead-cover-front_oo_light_1767624888.stepSTEP · 1.4 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

More Remix Notes:

This is of course based off of the very cool:  

SE3D Elegoo Centauri Carbon Toolhead Cover

UPDATE:

Please consider downloading this other, latest remix, it is what I was going for initially and the fan mounting is SO MUCH MORE ROBUST! And it's magnetic!

https://www.printables.com/model/1421513-lightend-hotend-cover-with-diamond-pattern

A lighter version of this is my new SM-33 Edition version - my new favorite! And also magnetic (SUPER easy nozzle swaps and jam/extruder maintenance). 

Initially, I removed the top vent overhang on the top angled face to try and print on that face… I ran into other support issues doing that. 

Due to SE3D text getting messed up/butchered by my update, I cleaned it up and added the infinity symbol.

Turned out to be a lighter model (about 8g lighter for ASA) and helps with PET-GF, the (more dense) material I chose to print it out of. 

WHY:

First of all, in general, a lightened tool head cover reduces toolhead mass and inertia, which can improve VFAs and printing speeds after you re-run input shaping (MANDATORY). 

Print settings:

I used 1 wall for both pieces EXCEPT I added modifiers (right click on object —> Add Modifier) to the pins for more infill. I also added a support blocker cube (same menu) for the strain relief - it doesn’t need them. Layer height doesn’t matter, 0.2 is fine. I also iron all top surfaces with 30% flow. Printed in ASA this came out to around 40g. I also tried PET-GF - but that is around 51g, for the raw cover weights.

Notes

This is a hackjob (literally hacked the top off), but the model is sound. Print with confidence, face down is fine! Just be careful with the dovetails as SE3D mentioned.

Read more Show less

Print spec

Formats
stepstlstp
Model files
8
Total size
16 MB
Largest file
4.9 MB

0 comments

See all