
Xe Cộ - Máy Móc
Boxer 50 feet (HO)
- Downloads
- 272
- Likes
- 118
- Views
- 1,049
- Remixes
- 1
- Comments
- 0
Files 15 11.3 MB
- Brake_air_cylinder_1766314260.3mf3MF · 1.2 MB
- Brake_Control_1_1766314261.3mf3MF · 160.4 KB
- Brake_part_1_1766314262.3mf3MF · 22.2 KB
- Brake_wheel_1766314262.3mf3MF · 778.8 KB
Make a variant with AI
Build another version of this model.
Remix versions 1
See all 1 remixDetails
- Model ID
- #19150
- Category
- Xe Cộ - Máy Móc
- Published
Description
🥉Bronze Level: Model will be updated in the future to include directions and decals (Sept. 4 2023)
American Car Foundry 50' 6" Boxcar in HO scale. For this model you will need to print the following amounts from the list.
- 1x Boxcar end 1
- 1x Boxcar end 2
- 2x Coupler cover A
- 2x Coupler cover B
- 2x Boxcar Side
- 1x Floor
- 1x Roof
- 1x Brake Part 1
- 1x Brake Control 1
- 1x Brake Air Cylinder
- 1x Brake Wheel
- 2x End Bracket
- 1x Mid Bracket
- 14x Pins
You will also need the following additional parts to assemble the car.
- 3 M2x4 screws
- 2 M2x8 screws
- 4 Wheel sets or 2 trucks with wheels
- 2 couplers
- Aprox. 28 grams of weight
- Glue
Instructions:
- Glue 2x Pinsinto the mid bracket
- Glue step 1 into the bottom middle of theRoof
- Glue 2x pinsinto the End Bracket and glue Boxcar end 1. Repeat with the other boxcar end
- Insert and glue 6xpinsinto the side of the assembly from step 3. Attachboxcar sideto these pins. Repeat with other side.
- Insert weights to the bottom of the boxcar floor.
- Attach the floorusing 1x M2x4 screw in the middle hole.
- Create a coupler box assembly using Coupler box A, Coupler box b, a coupler, and 1x M2x8 screw.
- Attach the assembly using the screw to the ends of the Floor.
- Attach the two trucks using 2x m2x4 screws.
Print spec
- Formats
- 3mfstl
- Model files
- 15
- Total size
- 11.3 MB
- Largest file
- 3.2 MB



