VORON Fidget Toy

Remix of Công tắc Fidget In Liền (Print-in-Place) By kriswillcode

By VoronDesign

Downloads: 711
Likes: 242
Views: 5,527
Remixes: 0
Comments: 0

Download all (.zip)· 9 files · 19.9 MB· 19.9 MB

Files 9 19.9 MB

VORON-Fidget-Toy_1767533895.stepSTEP · 7.6 MB
a_gear_right_1767533897.stlSTL · 3.8 MB
a_click_spring_x2_1767533898.stlSTL · 180.6 KB
a_lever_switch_1767533898.stlSTL · 145.6 KB
a_rocker_switch_1767533899.stlSTL · 177.9 KB
case_top_1767533900.stlSTL · 374 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #191170
Category: Đồ Chơi Khác
Published: 01/04/2026
License: Creative Commons — Attribution — Noncommercial — Share Alike
Tags: toy
fidget
voron
clicky

Show more tags Show fewer tags

Description

VORON Fidget Toy

A fidget toy that has two printed clicky switches and a set of smooth rolling gears that uses VORON BOM hardware to assemble.

Credit for original spring mechanism idea goes to @kriswillcode

-----

BOM: 4 M3x12 SHCS

These are the recommended print settings:

Material: ABS or PLA
Layer height: 0.2mm
Extrusion width: 0.4mm
Infill percentage: 40%
Infill type: grid, gyroid, honeycomb, triangle, or cubic
Wall count: 4
Solid top/bottom layers: 5

Assembly: Refer to included manual, or:

1. Install click springs into slots on case bottom
2. Install rocker switch and click switch on posts on case bottom ends
3. Install gears on center posts of case bottom
4. Apply case top over bottom case/components
5. Secure with 4 M3x12 SHCS, threaded into plastic. Gently!