Máng hứng phế liệu Filaments Qidi Plus 4

Overview

A favorite among Bambu users, I thought I would adapt this popular chute for us Plus 4 owners. I have also included some of my favorite items I use as poop chute catches. Want to remix? STEP files are included.

Assembly

You will need to remove and reuse the three screws circled in the image below to mount the chute.  If you have a fan vent that sits proud of the rear access panel, this mod will not properly fit. 

The mount must slide over the mount connector before attaching to the printer.  See below

Then just attach as many segments as you need to suit your needs.

⚠If you are using the filament monster you may need to adjust its height depending on your setup.⚠

Printing

Very straightforward. All models should be arranged and ready for a supportless print. Brim required in some areas.

Nozzle: .4

Filament: PETG | PLA

Layer Height: .2

Supports: No

Bed Adhesion: Yes; Brim on Segment and Mount Connector.

 Other Models you may like:

Like my work?

❤ a few of my models

and

Follow Me

EDITS:

12/26/25 | Resized the filament monster to be more accurate