Bộ điều hợp của tôi

Use this to build yourself adaptors for different hose sizes.

Variables for customizer:

*$fn - defines how smooth the curves are. Higher values are smoother, but take more processing effort. Max value is 360. Default is 200.

*fit - is how well you want the fit, 0.5 mm is a snug fit.

*wallThickness - is how thick the walls are of your adaptor.

*topSectionSize - is the diameter of the upper part of the adaptor, this should match your actual hose size, the fit is subtracted from this.

*bottomSectionSize - is the diameter of the lower part of the adaptor, this should match your actual hose size, the fit is subtracted from this.

*topSectionHeight - is how tall the top section will be.

*midSectionHeight - is how tall the middle section, that joins the top and bottom sections, will be.

*bottomSectionHeight - is how tall the bottom section will be.

Sample .stl file is 63mm wide top section 80mm high with a 50mm high mid section and a bottom section of 100mm wide and 60mm high.

Category: Other