Neo SKRPi Case – Vỏ SKR Mini E3 V3 & Raspberry Pi 3B+/4

This is a Case for the SKR Mini E3 V3 and a Raspberry Pi 3b+ or 4.

I was mainly by the two mentioned designs inspired.

The following features are incorporated:

• Print without supports
• Custom supports on overhangs
• Tuned for 0.3mm layer height for faster printing
• Mounts on the standard frame mounting holes
• Ziptie clips
• Reuse of mostly all cables
• One cover version with two fan cutouts for RPi and SKR mini (highly recommended for the RPi in an enclosure)
• Second cover version with one fan cutout for the RPi and a reset button

Parts needed:

• Micro USB Cable (AMLE-V8RI, 25cm)
• Heat Inserts M2.5 and M3 (Package C)
• Flat Head Screws (M2.5)
• Socket Head Screws (M2.5 and M3)
• Molex Connectors

Try using the line width from the .3mf files to reduce printing time and unnecessary gap fill as much as possible.

Please share your thoughts, ideas and makes with me! :)