BeamCase SFF - giá gắn FlexATX phía trước (front FlexATX mount)

This is a front bracket that can be used to mount a FlexATX PSU at the front of a BeamCase SFF. This enables very short builds with 200mm beams, while maintaining full air cooler support. 

This bracket is only compatible with standard Flex-ATX PSUs with a length of 150mm, modular units, that are longer will not fit. 

Required Hardware 

• M3x16mm countersunk screws 

• M3x20mm countersunk screws (optional but can be beneficial for front case panels)

• 1x 6-32 unc screw at least 20mm long

• 2x 6-32 unc screw approximately 9mm long

• 4x Voron style heat inserts (M3x5x4)

• Requires a very compact downwards pointing PSU extension. I used this specific one and it just barely fits.