Phễu châm dầu động cơ M30x1.5 cho Z750

Printed on a Voron 2.4, 0.6mm nozzle, 0.3 layer height, 2 walls and 30% cubic infill. Use 5mm brim on the funnel (second image) and 0.15mm layer height modifier on the nut threads (third image).

Attach the nut to the clutch cover. The inner side of the nut and the outer side of the funnel base are a tapered dodecagon shape (fourth image) that can be easily assembled at any position, chose the most upward possible position.

Pick the correct filament type to your usage, do not use PLA if you change the oil with the engine hot.

No, I do not share the design files. Use at your own risk.