Chân đế tàu vũ trụ (spaceship stand)

During assembly, following step 3 according to the instructions, the screw must be fully tightened. If there is great resistance, the screw should be reversed. Then insert the element of step 4, depending on the expected inclination of the ship. Then we unscrew the screw, clamping the BU1 element in the expected position.

Colored elements are intended to be glued to the base. The lower decorative elements are also available in a version with the possibility of attaching figurines or other Lego elements.

The DU and DB elements are identical for both sides of the model.