Skip to main content
F3D
Lưới Tile cho Card Board Game 1 inch (2 phiên bản) 1

3 images

Board Game

Lưới Tile cho Card Board Game 1 inch (2 phiên bản)

By galshemesh_1718578

Downloads
5
Likes
1
Views
70

Files 2 11.9 KB

  • Tabletop_Board_Game_1-inch_Tile_Grid_v1_1767383704.stlSTL · 5.9 KB
  • Tabletop_Board_Game_1-inch_Tile_Grid_v2_1767383705.stlSTL · 5.9 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This is a simple tile grid for housing 1-inch square board game cards, holding them in place so they don't move. I designed this for a tabletop game I'm building and thought that it may come in handy for others too.

There are 2 versions:
- Version 1: with connecting parts of 0.3cm between each tile (more space between tiles)
- Version 2: with connecting parts of 0.15cm between each tile (less space between tiles)

The two version don't connect! Use only one version to your liking.
I suggest to print 2 pieces of each version to see what works for you best before mass amount print. Best way to connect them is to do this on a flat surface and not in mid-air.

No support needed - just print them with the card socket pointing up.

The tolerance I used for the connecting parts is 0.2mm, and may be either loser or tighter between different types of filaments - I based and tested it with PETG as that type of filament is less fragile and they connect with each other very nicely and don't wiggle. Taking them apart is also not very hard.

If you liked these models please rate, and feel free to share pictures of your board games using them.

Feedback and comments are more than welcome.

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
11.9 KB
Largest file
5.9 KB

0 comments

See all