Rơ-moóc cho MN82 RC Land Cruiser 1/16

I like the simplicity of this trailer and wanted to adapt it to fit the MN82 Land Cruiser.

I scaled all parts to 125%.
The drawbar was modified to fit the printable trailer hitch. 
It fits the standard MN82 and even my slightly lifted model. 

There are two versions available:

Version 1: drive on trailer, just like the original model by ProfessorBoots, scaled and adapted to fit the MN82. For the bed and the ramp is also a wider version available (suffix: "_wide").

Version 2: trailer with walls to carry small stuff. The wheels are placed a little more to the middle. 
The bed with walls was printed with color change. It is available in two heights (20mm and 35 mm).
I'm planning to add a rear bumper with lights later.

Identical parts are placed in the root folder. Everything fits on a Core One printbed.

I printed most of it in PETG. The bed with walls was printed in PLA to reduce stringing between the little dots. I printed the tires in TPU, but PLA or PETG should probably work here too. The only part that needs supports is the drawbar. 

It can be assembled using some M3 bolts. No glue, just bolts and maybe some nuts and washers (optional for more durability). If any part breaks or gets an improved version, you can just exchange it.

Feel free to modify! If you have better ideas for the coupling, let me know or share a remix! As it is now, it works absolutely fine while driving around, even with load and on uneven ground. Only while driving another car onto the trailer it snaps off the hitch. I'll work on that…