New
Pocket-Size Third Hand Mini Spring Loaded Vise
ByrjunLikes0Downloads301
DIY
Raspberry Pi Mount cho trường hợp ITX của Myelectronics 2U
- Downloads
- 10
- Likes
- 32
- Views
- 299
- Remixes
- 0
- Comments
- 0
Files 1 171.8 KB
- pi_mount_1767492206.stlSTL · 171.8 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #18779
- Category
- DIY
- Published
Description
This is a mount I designed to fit a Raspberry PI 4 into my case (for PIKVM).
It's a pretty tight fit. It barely clears the headers of the motherboard and I had to use a right angle usb-c cable to get the usb to connect to the PI.
This requires two 3mm heat set inserts for the bottom holes, and self taping 2.5mm screws for the PI.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 171.8 KB
- Largest file
- 171.8 KB
0 comments
You may also like 12 models
See all-
-
NewSolderMate - Fully 3D Printed Desk Soldering Companion
ByleonicLikes0Downloads1.4K -
Bộ sưu tập 11 nhân vật mô hình Mecca Chameleon in 3D vui nhộn
ByZED4EverLikes313Downloads5.2K -
Cable Mount - Kẹp Giữ Dây Cáp (Có Lỗ Bắt Vít)
ByVC_DesignLikes271Downloads755 -
Còi Tàu Hơi Nước Mini
ByfifindrLikes500Downloads4K -
Hộp bảo vệ 3D cho Shelly 1 / 1PM Case - Gọn gàng và an toàn
Bymrfixit_324954Likes65Downloads477 -
NewAAA Battery Case
Bylab-96Likes0Downloads104 -
Dụng cụ mở hộp nhỏ gọn | Dao cắt thùng carton an toàn in 3D
ByDan Schwartz SchwartzLikes744Downloads3.4K -
Bộ chuyển đổi từ khe Keyhole sang thanh ray DIN!
ByBrokentooth_designsLikes83Downloads452 -
Grippy Broom Holder
Byvc-designLikes0Downloads3.2K -
NewSimple Vise
Bythorin-oakenshieldLikes0Downloads529 -
Hộp Chia Thuốc Thông Minh Hàng Tuần - Hệ Thống Tự Động Rơi Gravity Cascade
ByUpcrid3D_1585693Likes808Downloads2.1K
