Ngàm UBBI cho cảm biến filament runout mặc định của Elegoo Neptune

UBBI mount adapter for Elegoo stock filament runout

INSTALLATION GUIDE

🤩 Do you like the design? You can help fund innovations like this!
Consider supporting me!
Much appreciation given to my supporters, and you get exclusive access to various CAD files!
Submit feature requests here!

Features:
- Mounted with friction, seated in place with the slits and screw head holes, will stay firm
- Allows quick connection to bowden setup
- Prints with minimal support
- Twist locking mechanism with audible snap

NOTE:
The first 3-4 snaps must be done with a wrench, to break in the mechanism before it gets soft enough to be used by hands!

Recommended print settings:
- Nozzle diameter: 0.4mm
- Layer height: ≤ 0.2mm
- Reverse on odd: disabled
- Precise walls: enabled
- Wall order: i/o/i
- Tolerance requirement: 0.1mm
- Print orientation: as imported
- Supports: included with the model, enable support generation and change to manual placement, don't add anything

Recommended materials:
 - PETG
 - ABS/ASA

Changelog:

Official release

Changes

v1

First official release

v3

Updated to UBBI v72

v4

Added ribs at screw mounting hole for strength

v4.5

Added model for runout sensor that have 5.5mm poles (usually they are 4.45mm! Measure before print!)

v5

Implemented anti sag to pole slit, re-aligned screw hole.

v7

Updated to UBBI v82

v9

Adjusted pole location for 4.5mm pole version, added video installation guide

v10

19th July 2024

Updated to UBBI v87

v12

3rd August 2024

Updated to UBBI v90